Maintenance and care of window film
1. Do not move the glass within 3 days after window film installation.
2. Within 15 days after the installation of the window film, do not use water to scrub the coated glass.
3. Do not use suction cups to hang or use adhesive to fix any items on the laminated glass, and do not paste self-adhesive decorations on the window film.
4. Spray the surface of the window film lightly and evenly with an ammonia-free detergent, then gently dry the glass with a clean, soft cotton cloth or soft paper towel, which often needs to be wrung out, and the pure topical alcohol contained in the cotton cloth/paper towel will quickly dissolve huge smudges and greasy fingerprints. If the stains do not come off, re-spray with cleaning solution and scrape the film horizontally from top to bottom with a soft rubber squeegee until dry. Dry the edge of the window film with a towel.
5. Window film due to the use of adhesive tape, instant stickers or decals, the removal of these materials when the residual glue or adhesive, available soft clean cotton cloth dipped in acetone 〈nail polish remover〉 gently scrubbing the contaminated area, you can quickly and completely remove these residues in the glass film on the adhesive, a small amount of acetone will not damage polyvinyl acetate film, but can be dissolved and completely evaporate adhesive and most of the spray paint immediately.
6. Do not use hard scrubbing boards, brushes, or cloths containing sand particles to clean the window film.