Window Privacy Film Glass Decorative Film Sticker

Classic Retro Reeded Glass window film

Professional grade, Cheapest price.

Get that classic look anywhere - in your Home, Office, Shop

This is a high quality film which looks and feels like reeded glass, retails at around £80 per square metre.

This listing is for 75cm wide film (minimum width), but the film can be butted together for wider areas of glass. Lenghts come in 1mt, 2mt and 3mt sizes

Wet apply for a bubble free finish. Instructions supplied with each order

Reeded Glass adhesive film simulates real reeded glass. Bands are 1/2″ wide and the reeded band direction runs vertically down the length of the roll. The reeded band height is determined by the length of the material ordered.

This film has a clear silicone release liner that needs to be removed before installation. This film is applied using the same tools and techniques for window films.

How To Apply Window Film

Tep by step instructions on how to apply window film & frost film

Regardless of the type of window film or stickers you purchase, whether frosted, tinted, mirror ordecorative, the principle on how to fit window film will be the same.There are also many tutorial videos available on-line

Glass Preparation the crucial task)

Make a slip solution using a few drops of washing up liquid mixed with water in a spray bottle andthoroughly clean the glass, Use a glass scraper to remove specks of paint, or any other glasscovering like stickers.

Film Cutting

Unless your window film is already cut to size, and if the film has a paper liner with a metricgrid, measure your glass at the top and bottom, and left and right and mark and cut your windowfilm. You can also cut the film biqger than required and trim it once applied to the qlass.

Film Application

A. Throughroughly wet the glass with the slip solution.

B. Place the window film face down an a flat surface and expose a small amount of the adhesive or cling side.

C.Spray the adhesive or cling side liberally with the slip solution as you peel off the protective linel

D. Slip the adhesive or cling side of the film on the glass butting one edge and the top against thewindow frame or rubber aasket (double alazed unit)

Squeegee Technique

A. Liberally wet the face of the film with the solution to act as a lubricant for your squeegee or feltedged tool.

B-C. Squeeze out the solution from under the film using a firm and even pressure, starting from thtop and working your way down and across the film.

Film Trimming

Run a credit card and a retractable knife blade down the edge of the qlass to trim any excess filmThe thickness of the card will allow for a small gap to help any remaining solution to be squeezedout. Once trimming is complete go over the film once more to squeez out all the solution.

Final Checks

1. Make sure that all the solution has been squeezed out.

2.Wipe the film and any remaining solution with paper towel.

3. Inspect the film on both sides of the glass to check for any trapped solution or air bubbles.